Sort by:
Ceramics Information
Cosmetic box: 20.5 x 30.5 x H9.5 / Weight: 1355g Size: approx. 8.5 x H9.5cm / Weight: approx. 229g / Full water capacity: approx. 305ml
Accessories Information
This synthetic/natural powder (Mikawa Nagura) blend is a perfect finisher for most carbon steels. Designed to be used after the 3000 grit Ikyu Shin Nagura.
These are soaking stones on the softer side which are best used with a slurry, so use a lapping plate or Nagura stone.
Ceramics Information
Made in Japan
8.5cm x 9cm
310ml capacity
*Available to Australian customers only
Specifications
| Style: | Paring |
| Blade Length: | 90mm |
| Weight: | 76gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
| Style: | Higonokami |
| Blade Length: | 70mm |
| Weight: | 32g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Stainless Steel |
| Handle Material: | Custom Engraved Ebony |
Accessories Information
– Quickly removes rust from metal surfaces
– 65 x 40x 8mm @ 35g
165mm SKD Core, Stainless Nashiji Cladding Bunka Knife.
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 305mm |
| Weight: | 145g |
| Blade Height @ Heel: | 50mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.9mm |
| Blade Material: | SKD Core, Stainless Nashiji Cladding |
| Handle Material: | Burnt Chestnut w/Buffalo Horn Bolster |
| HRC: | 63 |
Specifications
| Style: | Kiritsuke |
| Blade Length: | 240mm |
| Overall Length: | 395mm |
| Weight: | 175g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Ginsan Core, Nashiji Soft Stainless Clad |
| Handle Material: | Octagon Oak |
| HRC: | 61 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 240mm |
| Overall Length: | 378mm |
| Weight: | 147g |
| Blade Height @ Heel: | 31.5mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 4mm |
| Blade Material: | White 2 Carbon Steel Core + Soft Iron Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | 62-63 |
Accessories Information
This synthetic/natural powder (Mikawa Nagura) blend is a perfect finisher for most stainless steels (AUS8/10, VG10, Ginsan etc) and provides a very toothy yet refined everyday edge for carbon knives. Designed to be used after the 1000 grit Ikyu Shin Nagura.
These are soaking stones on the softer side which are best used with a slurry, so use a lapping plate or Nagura stone.
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 305mm |
| Weight: | 145g |
| Blade Height @ Heel: | 50mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.9mm |
| Blade Material: | SKD Core, Stainless Tsuchime Cladding |
| Handle Material: | Burnt Chestnut w/Buffalo Horn Bolster |
| HRC: | 63 |
Specifications
*Available to Australian customers only*
*Bundle includes Combination Whetstone, Base, Cleaning Stone, Guide Clip, Edge Guards, and Tan Habitat 6pc Knife Roll
| Style: | Gyuto & Petty |
| Blade Length: | 210mm & 135mm |
| Handle Material: | Pakkawood w/stainless bolster |
| Steel: | AUS10 Stainless Steel |
| HRC: | 59 |
Ceramics Information
Capacity: 380ml
Specifications
| Style: | Butchery Cleaver |
| Blade Length: | 182mm |
| Overall Length: | 318mm |
| Weight: | 569g |
| Blade Height @ Heel: | 86mm |
| Bevel: | Double Bevel |
| Spine Thickness : | 3.4mm |