Sharpening Gear
67 products
67 products
Sort by:
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at just shy of 700g, these will make light work of even the hardest stones.
*Replacement Sheet only with adhesive backing*
The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives.
With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.
A high grade 5000 grit ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.
When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.
- Dimensions: 259 x 86 x 56mm
- Weight: approx. 1,960g
The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.
-
Dimensions: 253 x 80 x 53mm
- Weight: approx. 640g
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 29.4
- Mesh: 500
- 360g
Accessories Information
One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length
Accessories Information
Supreme whetstones made by Suehiro Japan. The Debado are splash and go stone, the SNE1200 Grit is considered a mid-grit stone and is an essential step in your knife sharpening process. These stones are much harder than the usual Suehiro stones, resulting in slow wear and minimal dishing.
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 Very Coarse (Only for larger repairs)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #320 Coarse (Only for stubborn steel or small repairs)
Weight:
Dimensions:
Accessories Information
Heavy duty, sturdy rubber-based whetstone holder.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length
– Weight: 577g
Accessories Information
The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.
The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives.
With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.
A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone
- Guide Clip
- Nagura stone
- Camellia Oil
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.
- Medium-Soft
- Whetstone grit ＃1000
- Whetstone Size 175×55×15mm
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 40
-
Mesh: 320
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 25
-
Mesh: 500
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 11
-
Mesh: 1000
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 4
-
Mesh: 3000
- No Case Included