Accessories
247 products
Sort by:
247 products
247 products
Sort by:
The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.
-
Dimensions: 253 x 80 x 53mm
- Weight: approx. 640g
Accessories Information
| Style: | Offset Plating Tweezer |
| Blade Length: | 150mm |
| Construction: | Stainless Steel |
Lightweight heavy duty PVC pouch with 2 tie up straps for storing up to 10 chef tools,
Not for storing knives.
Interior storage space: 370mm wide x 245mm tall
Pocket depth: 110mm
Smallest pocket width approx: 22mm
Largest pocket width approx: 42mm
*Chef tools not included
Accessories Information
Specifications
| Style: | Gloss Silver Stainless Steel |
| Length: | 159mm |
| Volume | ~1 Teaspoon |
Accessories Information
| Style: | Gloss Silver |
| Length: | 195mm |
| Construction: | Stainless Steel |
Accessories Information
Includes
- Yoshoku 1000/6000 Grit Deluxe Combination Stone (soak for 5-10 minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
Accessories Information
Specifications
| Style: | Gloss Silver Stainless Steel |
| Length: | 220mm |
| Volume | ~1 Tablespoon |
Accessories Information
| Style: | Brushed Matte Silver |
| Effective Length: | 80mm |
| Construction: | Stainless Steel |
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
*Chefs Edge is not liable for any damage caused to knives while using the magnetic holder*
*Knife Not Included* This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder.
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Accessories Information
– Plastic blade guard with felt lining
– 30cm length
– Most suited to 27/30cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length
Accessories Information
The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.
The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives.
With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.
A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.
Accessories Information
Specifications
| Style: | Gloss Silver Stainless Steel |
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
Knife Information
A traditional Japanese tool for woodworking and leather crafting. It has a single bevel edge much like Japanese sushi knives, meaning it can be sharpened to have an extremely sharp edge.
Brand: Morihei
Profile: Kiridashi
Steel Type: Blue #1 (Aogami)
Total Length: 201mm
Blade Length: 45mm
Bevel Symmetry: Single Bevel
Hand Orientation: Right Handed
Weight: 35g
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world before the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of that sharpness has resulted in a peeler of the highest quality.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
These replacement blades are only compatible with the Suncraft Ever Peelers.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of this sharpness has resulted in a peeler of the highest quality.
Accessories Information
- 500 Grit Nagura Stone
- Cleaning and flattening Yoshoku Whetstone
Show
per page