94 products
94 products
Sort by:
Whetstones & Knife Care
Accessories Information
– Plastic blade guard with felt lining
– 22cm length
– Most suited to 18cm to 21cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
– Plastic blade guard with felt lining
– 18cm length
– Most suited to 15-17cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
– Plastic blade guard with felt lining
– 27cm length
– Most suited to 24cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
– Plastic blade guard with felt lining
– 30cm length
– Most suited to 27/30cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #1000 (Use in the early stages of sharpening)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #1000 & #5000 (The ideal 2-step progression)
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
These Japanese made whetstones are some of the most popular on the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear. The Rika is a crowd favourite finishing stone for it's smooth as butter feel, delivering pristine edges with great bite.
- Size 1 Finishing Whetstone (white) #5000
- Whetstone Size 206×73×23mm
- Package Size 256×90×55mm
- Appr. 900g
- Soaking Stone
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 4.9
- Mesh: 3000
- 360g
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback. The Karasu are the special edition in this range, made from natural whetstone powder. They are one of the finest finishing stones available.
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 2.45
- Mesh: 6000
- 360g
Accessories Information
A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.
Accessories Information
– Plastic blade guard with felt lining
– 24cm length
– Most suited to 21cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 29.4
- Mesh: 500
- 360g
Accessories Information
The Ikyu 1000 grit is definitely different from many other stones we stock. Due to it's unique production method and relatively secretive blend ratio, it feels coarser, cuts faster, and feels more like a natural stone compared to many other 1000 grits.
It lays a fantastic base to progress to the Ikyu 3000, a blend of Mikawa Nagura and synthetic powder. It's extra thickness makes for a great value stone. These stones need to be soaked before use.
About the Natsuya
The Amakusa is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*