Sort by:
1783 products
1783 products
*Available to Australian customers only*
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Weight: | 185g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)
Weight: 668g
Dimensions: 210 x 70 x 15mm
Specifications
| Style: | Bone Chopper |
| Overall Blade Length: | 230mm |
| Overall Length: | 335mm |
| Weight: | 845g |
| Blade Height @ Heel: | 98mm |
| Bevel: | Double Bevel |
| Spine Thickness : | 7mm |
| Product Code: | KKF1602 |
These 4 piece timber knife holders are made in Japan, and are the perfect solution to showcase your knives. Knives not included.
- Timber construction
- 29cm x 36cm x 22cm (Widest x Height x Depth)
- top pegs 15.5cm apart
- bottom pegs 25cm apart
Specifications
| Style: | Petty |
| Blade Length: | 143mm |
| Overall Length: | 281mm |
| Height @ Heel: | 29mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 96g |
| Blade Material: | White 2 Carbon Steel core + Soft Iron Kurouchi Clad |
| Handle Material: |
Dark Oak Octagon |
| HRC: | 62-63 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 173mm |
| Overall Length: | 305mm |
| Weight: | 101g |
| Blade Height @ Heel: | 28mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 3mm |
| Blade Material: | Ginsan Core w/Stainless Tsuchime Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | ~61 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 200mm |
| Overall Length: | 342mm |
| Weight: | 119g |
| Blade Height @ Heel: | 30mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 3mm |
| Blade Material: | Ginsan Core w/Stainless Tsuchime Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | ~61 |
Specifications
| Style: | Yanagiba |
| Blade Length: | 235mm |
| Overall Length: | 380mm |
| Weight: | 143g |
| Blade Height @ Heel: | 33mm |
| Bevel: | Single Bevel |
| Spine Thickness @ Heel: | 3mm |
| Blade Material: | Ginsan Core w/Stainless Tsuchime Clad |
| Handle Material: | Octagon Walnut w/Pakka Wood Bolster |
| HRC: | ~61 |
Specifications
| Material: | Stainless Steel Shaft, Plastic Handle |
| Zestable Length: | 185mm |
| Weight | 99g |
165mm Ginsan Core, Nashiji Soft Stainless Clad Bunka Knife.
Specifications
| Style: | Bunka |
| Blade Length: | 165mm |
| Overall Length: | 314mm |
| Weight: | 136g |
| Blade Height @ Heel: | 43mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | Ginsan Core, Nashiji Soft Stainless Clad |
| Handle Material: | Octagon Oak |
| HRC: | 61 |
Accessories Information
– Plastic blade guard with felt lining
– 24cm length, 5.5cm height
– Most suited to 21cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
170mm Ginsan Core, Migaki Soft Stainless Clad Bunka Knife
Specifications
| Style: | Bunka |
| Blade Length: | 170mm |
| Overall Length: | 310mm |
| Weight: | 132g |
| Blade Height @ Heel: | 41mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel/Mid: | 2mm/2mm |
| Blade Material: | Ginsan Core, Migaki Soft Stainless Clad |
| Handle Material: | Octagon Oak |
These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.
- Medium-Soft
- Whetstone grit ＃1000
- Whetstone Size 175×55×15mm
165mm VG10 Core Black Damascus Clad Santoku Knife
Specifications
| Style: | Santoku |
| Blade Length: | 165mm |
| Weight: | 150g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Core Black Damascus Clad |
| Handle Material: | Octagon Pakkawood w/white spacer |
| HRC | 61 |
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 2
-
Mesh: 6000
- No Case Included
Specifications
| Style: | Nakiri |
| Blade Length: | 165mm |
| Weight: | 164gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
Specifications
| Style: | Petty |
| Blade Length: | 140mm |
| Overall Length: | 265mm |
| Height @ Heel: | 30mm |
| Spine Thickness @ Mid: | 1.8mm |
| Weight: | 80g |
| Blade Material: | Blue Super Core, Stainless Migaki Tsuchime Clad |
| Handle Material: | Octagon Ebony |
| HRC: | ∼63 |
*Available to Australian customers only*
Specifications
| Style: | Bunka |
| Blade Length: | 180mm |
| Weight: | 175g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
Specifications
| Style: | Kiritsuke |
| Blade Length: | 200mm |
| Weight: | 168g |
| Blade Material: | VG10 Core, Fluorine Resin Non Stick Coated Stainless Clad |
| Handle Material: | Wenge/Buffalo Horn |
| HRC: | 60-61 |
Specifications
| Style: | Sakimaru Sujihiki |
| Blade Length: | 400mm |
| Overall Length: | 540mm |
| Weight: | 526g |
| Blade Height @ Heel: | 51mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 2.5mm |
| Blade Material: | SG2 Core, Stainless Nickel Damascus Clad |
| Handle Material: |
Western Blue Acrylic |
| HRC: | ~64 |
Accessories Information
| Style: | Long Plating Tweezer |
| Blade Length: | 300mm |
| Construction: | Stainless Steel |
Specifications
| Style: | Butchery Cleaver |
| Blade Length: | 182mm |
| Overall Length: | 318mm |
| Weight: | 569g |
| Blade Height @ Heel: | 86mm |
| Bevel: | Double Bevel |
| Spine Thickness : | 3.4mm |
*Available to Australian customers only*
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Weight: | 90g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
Meet your new go-to for keeping your essential tools safe and close at hand. The Porter 3-Pocket Knife Bag is crafted from sturdy 1000D PVC, designed to handle the everyday demands of any kitchen. With a touch of buffalo leather trim, it brings a bit of timeless style wherever you go.
The three pockets provide just the right amount of space for your most-used knives and utensils, making it easy to stay organized whether you're heading to work or off to a culinary event. It’s all about keeping your gear secure, accessible, and ready for whatever’s next.
Features:
- Built from tough 1000D PVC for everyday use and easy to clean
- Buffalo leather trim adds a stylish touch
- Three pockets for your essential tools
- Perfectly portable for life on the move